(509) 506-0069

Se habla español

Concrete driveways in Chelan, Wenatchee, and North Central Washington

A driveway is the biggest slab most homes will ever have, and it takes the most abuse. Delivery trucks, boat trailers, snow plows, freeze and thaw cycles, and years of sun all work against a slab that was rushed. RACD Concrete pours driveways that are built from the base up so they stay flat, drain the way they should, and still look right ten winters from now.

Wide poured concrete driveway at a home near Chelan, WAFinished residential concrete driveway approach in Chelan CountyConcrete driveway and exterior flatwork on a Washington property

What goes into the pour

Most of the work happens before any concrete shows up. We look at how water moves across the property, where the low spots sit, and where the truck can reach. Then we excavate to the depth the soil calls for, bring in compacted base rock, set forms to hold the grade and slope we want, and add reinforcement sized to the traffic the driveway will see. Residential driveways in our area usually get four to five inches of concrete, with a thicker section where heavier vehicles turn or park. Control joints are cut on a spacing that gives the slab a place to crack where you will not notice it, instead of straight through the middle.

Finishes that fit the house

A broom finish is still the workhorse in Chelan and Wenatchee because it gives grip on grades and sheds water well. If you want more character, we can add a border, a saw cut pattern, exposed aggregate, or a stamped band along the edges that ties the driveway to the walkway and the front entry. Color can be integral or applied, and we will walk you through what holds up under sun and de-icer before you commit to it.

Replacement and expansion work

Not every driveway needs to be torn out. If the slab is settled at one end, spalling in patches, or cracked from a bad base, we will tell you honestly whether a repair, an overlay, or a full replacement is the right call. When a tear out is the answer, we break out and haul off the old slab, correct the base problem that caused the failure, and pour fresh. We also add turnarounds, RV and boat parking pads, and extensions for households that outgrew the original driveway.

Timeline and what to expect

Forming and prep usually take a day or two, the pour is a single day, and the slab can take foot traffic within a day or so. Vehicles should stay off for about a week while the concrete gains strength, and full cure takes about 28 days. We schedule around weather because pouring in the wrong temperature is one of the fastest ways to ruin a finish. We handle this work in Chelan, Manson, Wenatchee, East Wenatchee, Leavenworth, Quincy, and Moses Lake, and we also travel across Washington for larger projects.

FAQ

Concrete driveways questions

How long does a concrete driveway take to install?

Prep and forming usually take one to two days, the pour takes a day, and you can walk on it the next day. Keep vehicles off for about a week, and the slab reaches full strength around 28 days.

What prep work is included?

We excavate to the right depth, correct drainage and grade, place and compact base rock, set forms, and add reinforcement before any concrete arrives. On replacements we also break out and haul away the old slab.

How do I take care of a new driveway?

Rinse it off a few times a year, avoid de-icing salts the first winter, and reseal every few years to slow surface wear. Plow with a rubber edged blade to keep from chipping the finish.

Do you pour driveways outside of Chelan?

Yes. Chelan, Manson, Wenatchee, East Wenatchee, Leavenworth, Quincy, and Moses Lake are our regular service area, and we travel across Washington for larger projects.

Free estimate

Send a few photos of your space and your city. We will get back to you with a plan and a price.

CallRequest estimate