(509) 506-0069

Se habla español

Concrete repair and sealing in Chelan, Wenatchee, and nearby towns

Not every slab needs to be torn out. A lot of the concrete we look at is structurally fine and just needs cracks addressed, a worn surface brought back, and a sealer put on before another winter takes more out of it. Repair work is usually the cheapest way to buy years out of a driveway, patio, or walkway.

Repaired and sealed concrete driveway surface in Chelan County, WAResealed concrete walkway at a home near Wenatchee, WARestored concrete entry and porch surface at a Washington home

Crack repair and joint work

Cracks tell you something. A hairline shrinkage crack is cosmetic, a wide crack with a lip means the base moved or the slab settled, and a crack that keeps opening means something underneath is still moving. We look at width, displacement, and pattern before recommending anything. Repairs range from routing and filling with a flexible sealant to full section replacement where the concrete has failed. Control joints and expansion joints get cleaned and resealed so water stops running down into the base.

Resurfacing worn concrete

Surface damage from de-icer, freeze and thaw, or a bad original finish can often be corrected with a resurfacer or overlay bonded to the existing slab. That gives you a fresh wear surface, and it can carry a broom, textured, or decorative finish at the same time. The one requirement is that the slab underneath is sound. If it is spalling because the base failed, an overlay is just a cover, and we will say so rather than take the job.

Sealing and protection

Sealer is the cheapest insurance concrete gets. It slows water absorption, which is what drives freeze and thaw damage, and it keeps oil, de-icer, and stains from soaking in. Penetrating sealers keep the look natural and give strong protection against salt and moisture. Film forming sealers give a wet or glossy look and pop the color on decorative surfaces. Both need a clean, dry slab and the right weather window, and we schedule accordingly.

Timeline and maintenance schedule

Most repair and sealing visits are a one to two day job. Sealer needs a dry surface and moderate temperatures, so we watch the forecast rather than force it. Plan on resealing exterior concrete every two to three years, sooner on surfaces in full sun or heavy traffic, and rinse de-icer off in spring instead of letting it sit. We handle this work in Chelan, Manson, Wenatchee, East Wenatchee, Leavenworth, Quincy, and Moses Lake, and we also travel across Washington for larger projects.

FAQ

Concrete repair and sealing questions

How long does concrete repair and sealing take?

Most repair and sealing visits take one to two days. Sealer needs a dry slab and moderate temperatures, so we schedule around the forecast rather than rushing it.

What is involved in the prep?

We clean the surface, open and fill cracks, clear and reseal joints, patch spalled areas, and let everything dry fully before sealer goes on. Sealing over a damp or dirty slab is why sealer fails early.

How often should concrete be resealed?

Every two to three years for most exterior concrete in this climate, and more often for surfaces in full sun or under heavy traffic. Rinse off de-icer in spring instead of letting it sit.

Can every cracked slab be repaired?

No. If the base failed or the slab is settling, a repair only hides the problem. We look at the crack pattern and displacement first and tell you when replacement is the better use of your money.

Free estimate

Send a few photos of your space and your city. We will get back to you with a plan and a price.

CallRequest estimate